{"title":"SILCA","description":"\u003cp\u003eSILCA chain wax and tubeless products for drivetrain and tyre maintenance. Find Super Secret 2.0 drip wax, Ultimate tubeless sealant and valves, plus practical workshop accessories.\u003c\/p\u003e","products":[{"product_id":"silca-super-secret-2-0-ketjuvaha-100-ml","title":"SILCA Super Secret 2.0 Drip Wax Chain Lube 100 ml","description":"\u003cp\u003eChain waxing loses much of its convenience if every top-up means removing the chain and heating a wax pot. SILCA Super Secret 2.0 puts a clean waxed drivetrain and low friction into a drip bottle. Apply it to the rollers, let it cure and ride.\u003c\/p\u003e\n\u003cp\u003eThis is an emulsified wax lubricant rather than a conventional oil with wax in the name. The formula combines SILCA's tungsten disulfide, or WS2, with new fullerene friction modifiers and smaller wax particles. The lubricant works into the chain joints and dries to a clean wax film that attracts far less road dust than a wet oil.\u003c\/p\u003e\n\u003ch2\u003eWhat changed in version 2.0?\u003c\/h2\u003e\n\u003cp\u003eSILCA rates one application for roughly 350-400 km depending on conditions or until the chain becomes noisy. That is about 20% longer than the original Super Secret. In SILCA's wet and muddy testing the new formula lasted twice as long as version 1.0 while reducing drivetrain losses by a further 0.6-0.8 watts.\u003c\/p\u003e\n\u003cp\u003eUse Super Secret 2.0 as the chain's main lubricant or as a quick top-up between hot-wax treatments. It is the practical option when you want wax performance without removing the chain for every service.\u003c\/p\u003e\n\u003ch2\u003eHow to apply SILCA Super Secret 2.0\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eStart with a clean chain. Wipe a previously waxed chain. Fully strip and dry a previously oiled chain or a new chain with factory grease.\u003c\/li\u003e\n\u003cli\u003eShake the bottle well.\u003c\/li\u003e\n\u003cli\u003eCross-chain slightly to help the wax reach the rollers.\u003c\/li\u003e\n\u003cli\u003eApply one drop to every roller while slowly backpedalling.\u003c\/li\u003e\n\u003cli\u003eTurn the chain through several more revolutions to distribute the wax.\u003c\/li\u003e\n\u003cli\u003eLeave it to cure for at least four hours. Overnight is ideal.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eDrip wax or hot wax?\u003c\/h2\u003e\n\u003cp\u003eChoose Super Secret 2.0 for easy application on the bike, a clean drivetrain and long service intervals. Immersion waxing remains the cleanest and longest-lasting wax method. Super Secret 2.0 gives you a much quicker way to maintain a waxed chain and works well between hot-wax treatments.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the chain need to be cleaned first?\u003c\/strong\u003e\u003cbr\u003eYes. Wax needs a clean metal surface. Old oil and factory grease prevent the wax from bonding properly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long does it need to cure?\u003c\/strong\u003e\u003cbr\u003eAt least four hours. Apply it after a ride and leave it overnight when possible.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used on a hot-waxed chain?\u003c\/strong\u003e\u003cbr\u003eYes. It is suitable as a top-up wax and does not require solvent cleaning before the chain is immersed in hot wax again.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow often should I reapply it?\u003c\/strong\u003e\u003cbr\u003eSILCA states about 350-400 km per application depending on conditions. Reapply sooner if the chain becomes noisy or after especially wet and dirty rides.\u003c\/p\u003e\n\u003ch2\u003eProduct details\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 100 ml drip bottle\u003c\/li\u003e\n\u003cli\u003eType: emulsified drip wax chain lubricant\u003c\/li\u003e\n\u003cli\u003eFriction modifier: tungsten disulfide, WS2\u003c\/li\u003e\n\u003cli\u003eStated interval: approximately 350-400 km depending on conditions\u003c\/li\u003e\n\u003cli\u003eMinimum cure time: 4 hours\u003c\/li\u003e\n\u003cli\u003eUse: standalone chain lubricant or hot-wax top-up\u003c\/li\u003e\n\u003cli\u003eSKU: AM-AC-075-ASY-0100\u003c\/li\u003e\n\u003cli\u003eUPC \/ GTIN: 810093163519\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SILCA","offers":[{"title":"Default Title","offer_id":56989459710338,"sku":"AM-AC-075-ASY-0100","price":29.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0928\/1601\/5746\/files\/silca-super-secret-2-0-ketjuvaha-100-ml-1.png?v=1792489927"},{"product_id":"silca-ultimate-tubeless-venttiilit","title":"SILCA Ultimate Tubeless Valves - Pair, 50\/70 mm","description":"\u003cp\u003eA tubeless valve is a small part until air or sealant stops flowing through it properly. SILCA Ultimate Tubeless Valves focus on that exact point: high airflow, compatibility with most tyre inserts and a serviceable design that does not require a separate tool for every job.\u003c\/p\u003e\n\u003cp\u003eThe valve body is precision CNC-machined from aluminium. Channels at the base leave a path for air and sealant even when an insert sits inside the tyre. The removable Presta core makes sealant injection easier and the threaded aluminium cap doubles as a valve-core tool.\u003c\/p\u003e\n\u003cp\u003eEach pack contains one pair of black valves.\u003c\/p\u003e\n\u003ch2\u003eChoose 50 mm or 70 mm\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e50 mm\u003c\/strong\u003e is SILCA's recommendation for rims less than 40 mm deep. This version is threaded along the full stem.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e70 mm\u003c\/strong\u003e is designed for rims 40-60 mm deep. The longer stem leaves enough room for a pump head on a deeper rim.\u003c\/p\u003e\n\u003cp\u003eA 4 mm hex interface at the base gives controlled installation. Final tightening is hand tight. The low-profile lock nut sits neatly against the rim.\u003c\/p\u003e\n\u003ch2\u003eWhy does a removable core matter?\u003c\/h2\u003e\n\u003cp\u003eWith the core removed, sealant can be injected through the valve and the larger opening provides more airflow when seating the tyre. The core is also easy to clean or replace if dried sealant begins to restrict flow.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eAre the valves sold individually or as a pair?\u003c\/strong\u003e\u003cbr\u003eEach pack contains two valves.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich length should I choose?\u003c\/strong\u003e\u003cbr\u003eChoose 50 mm for rims under 40 mm deep. Choose 70 mm for rims 40-60 mm deep.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo they work with tyre inserts?\u003c\/strong\u003e\u003cbr\u003eSILCA states that the design works with most tyre inserts. Channels around the base help prevent an insert from blocking airflow.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan sealant be injected through the valve?\u003c\/strong\u003e\u003cbr\u003eYes. The valves have removable cores and are designed for injectable sealants.\u003c\/p\u003e\n\u003ch2\u003eProduct details\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePack: 2 valves\u003c\/li\u003e\n\u003cli\u003eValve type: Presta\u003c\/li\u003e\n\u003cli\u003eMaterial: precision CNC-machined aluminium\u003c\/li\u003e\n\u003cli\u003eColour: black\u003c\/li\u003e\n\u003cli\u003eLengths: 50 mm and 70 mm\u003c\/li\u003e\n\u003cli\u003eInstallation interface: 4 mm hex\u003c\/li\u003e\n\u003cli\u003eRemovable valve core\u003c\/li\u003e\n\u003cli\u003eAluminium cap with integrated core tool\u003c\/li\u003e\n\u003cli\u003eLow-profile lock nut\u003c\/li\u003e\n\u003cli\u003eCompatible with most tyre inserts\u003c\/li\u003e\n\u003cli\u003e50 mm SKU \/ UPC \/ GTIN: AM-AC-066-ASY-0100 \/ 810093163120\u003c\/li\u003e\n\u003cli\u003e70 mm SKU \/ UPC \/ GTIN: AM-AC-066-ASY-0200 \/ 810093163137\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SILCA","offers":[{"title":"50 mm","offer_id":56989459939714,"sku":"AM-AC-066-ASY-0100","price":32.9,"currency_code":"EUR","in_stock":true},{"title":"70 mm","offer_id":56989459972482,"sku":"AM-AC-066-ASY-0200","price":33.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0928\/1601\/5746\/files\/silca-ultimate-tubeless-venttiilit-1.jpg?v=1792489961"},{"product_id":"silca-ultimate-tubeless-sealant-2-0-litku","title":"SILCA Ultimate Tubeless Sealant 2.0 - 500 ml \/ 1 L","description":"\u003cp\u003eA tubeless sealant has to solve two different problems at once. It needs to reach the puncture quickly and build a plug before the tyre loses too much pressure. It also needs to remain liquid for months instead of turning into a dry layer that demands constant maintenance.\u003c\/p\u003e\n\u003cp\u003eSILCA Ultimate Tubeless Sealant 2.0 combines natural and synthetic latex with optimised carbon-fibre strands and advanced foaming agents. The foam carries the fibres through the tyre towards the leak. The fibres form a structure across the hole and the latex seals it.\u003c\/p\u003e\n\u003cp\u003eIn SILCA's testing the formula sealed punctures of 6 mm and remained effective down to -15 °C. Its stated working life inside the tyre is around six months.\u003c\/p\u003e\n\u003ch2\u003eA one-step formula\u003c\/h2\u003e\n\u003cp\u003eThe previous SILCA Ultimate system used a separate Replenisher. The current 2.0 formula does not need it. Fill the tyre with this sealant, check the level at around six months and top up with the same Ultimate Sealant 2.0 when required.\u003c\/p\u003e\n\u003cp\u003eDo not mix the new formula with the old SILCA Ultimate Sealant or its Replenisher. If the tyre contains the old product or another brand of sealant, clean the tyre before adding the new formula.\u003c\/p\u003e\n\u003ch2\u003eInjectable through the valve\u003c\/h2\u003e\n\u003cp\u003eThe formula can be injected through a valve with a removable core. The separate \u003ca href=\"\/en\/products\/silca-ultimate-sealant-injector\"\u003eSILCA Ultimate Sealant Injector\u003c\/a\u003e keeps the process controlled and clean. The injector is sold separately. Because the sealant contains fibres, it is not suitable for injection through Reserve Fillmore valves.\u003c\/p\u003e\n\u003ch2\u003e500 ml or 1 litre?\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e500 ml\u003c\/strong\u003e suits setting up and maintaining one or two bikes at home.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1 litre\u003c\/strong\u003e makes sense for several bikes, high-volume mountain or gravel tyres and frequent workshop use.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat size puncture can it seal?\u003c\/strong\u003e\u003cbr\u003eSILCA states 6 mm in its test conditions. Real-world results depend on tyre construction, the shape of the hole and what caused the damage.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow often should it be topped up?\u003c\/strong\u003e\u003cbr\u003eSILCA recommends checking and renewing the sealant at about six-month intervals. Top it up sooner if sealant has been lost while sealing a puncture.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it contain ammonia?\u003c\/strong\u003e\u003cbr\u003eNo. SILCA states that the formula is ammonia-free and safe for cotton tyre casings.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used with the old SILCA Replenisher?\u003c\/strong\u003e\u003cbr\u003eNo. The current formula works on its own and should not be mixed with the old sealant or Replenisher.\u003c\/p\u003e\n\u003ch2\u003eProduct details\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSizes: 500 ml and 1 L\u003c\/li\u003e\n\u003cli\u003eFormula: blend of natural and synthetic latex\u003c\/li\u003e\n\u003cli\u003eSealing material: optimised carbon-fibre strands\u003c\/li\u003e\n\u003cli\u003eStated puncture size: 6 mm\u003c\/li\u003e\n\u003cli\u003eStated life inside the tyre: around 6 months\u003c\/li\u003e\n\u003cli\u003eTested down to -15 °C\u003c\/li\u003e\n\u003cli\u003eAmmonia-free\u003c\/li\u003e\n\u003cli\u003eInjectable through valves with removable cores\u003c\/li\u003e\n\u003cli\u003eNot suitable for injection through Reserve Fillmore valves\u003c\/li\u003e\n\u003cli\u003e500 ml SKU \/ UPC \/ GTIN: AM-AC-059-ASY-0101 \/ 810093162918\u003c\/li\u003e\n\u003cli\u003e1 L SKU \/ UPC \/ GTIN: AM-AC-059-ASY-0100 \/ 810093162901\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SILCA","offers":[{"title":"500 ml","offer_id":56989460038018,"sku":"AM-AC-059-ASY-0101","price":26.9,"currency_code":"EUR","in_stock":true},{"title":"1 L","offer_id":56989460070786,"sku":"AM-AC-059-ASY-0100","price":44.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0928\/1601\/5746\/files\/silca-ultimate-tubeless-sealant-2-0-litku-1.png?v=1792489977"},{"product_id":"silca-ultimate-sealant-injector-litkuruisku","title":"SILCA Ultimate Sealant Injector - Tubeless Sealant Syringe","description":"\u003cp\u003eSeat the tubeless tyre first and add the sealant afterwards. The SILCA Ultimate Sealant Injector sends sealant directly into the tyre through the valve with its core removed. There is no need to open the tyre again or pour sealant through an unseated bead.\u003c\/p\u003e\n\u003cp\u003eThe syringe holds 2 oz. It is designed for SILCA's current Ultimate Tubeless Sealant and allows the formula's optimised carbon-fibre strands to pass through the syringe and a compatible valve.\u003c\/p\u003e\n\u003ch2\u003eHow to use the injector\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eSeat the tubeless tyre on the rim.\u003c\/li\u003e\n\u003cli\u003eRemove the Presta valve core.\u003c\/li\u003e\n\u003cli\u003eDraw the required amount of \u003ca href=\"\/en\/products\/silca-ultimate-tubeless-sealant-2-0\"\u003eSILCA Ultimate Tubeless Sealant\u003c\/a\u003e into the syringe.\u003c\/li\u003e\n\u003cli\u003eConnect the syringe to the valve and press the sealant steadily into the tyre.\u003c\/li\u003e\n\u003cli\u003eRemove the syringe, reinstall the valve core and inflate the tyre.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the syringe capacity?\u003c\/strong\u003e\u003cbr\u003eThe capacity is 2 oz.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it inject SILCA Ultimate Tubeless Sealant 2.0?\u003c\/strong\u003e\u003cbr\u003eYes. SILCA lists it as compatible with the current Ultimate Tubeless Sealant.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the valve core need to be removed?\u003c\/strong\u003e\u003cbr\u003eYes. The sealant is injected through the open valve body.\u003c\/p\u003e\n\u003ch2\u003eProduct details\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: tubeless sealant injector syringe\u003c\/li\u003e\n\u003cli\u003eCapacity: 2 oz\u003c\/li\u003e\n\u003cli\u003eCompatibility: SILCA Ultimate Tubeless Sealant\u003c\/li\u003e\n\u003cli\u003eUse: injection through a valve with its core removed\u003c\/li\u003e\n\u003cli\u003eSKU: AM-AC-059-ASY-0200\u003c\/li\u003e\n\u003cli\u003eUPC \/ GTIN: 810093162932\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SILCA","offers":[{"title":"Default Title","offer_id":56989460103554,"sku":"AM-AC-059-ASY-0200","price":11.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0928\/1601\/5746\/files\/silca-ultimate-sealant-injector-litkuruisku-1.png?v=1792490010"},{"product_id":"silca-disc-wheel-adapter-levykiekko","title":"SILCA Disc Wheel Adapter - Disc Wheel Pump Chuck","description":"\u003cp\u003eThe valve opening in a disc wheel is tight and a normal pump head is often too large or approaches at the wrong angle. The SILCA Disc Wheel Adapter is a short press-on chuck that gets air into the Presta valve without a long improvised hose arrangement.\u003c\/p\u003e\n\u003cp\u003eThe adapter threads into a pump or compressor head with a Schrader fitting. Its red gasket then presses onto the disc wheel's Presta valve. Knurled surfaces on the aluminium body provide a secure grip even when the valve sits deep inside the wheel opening.\u003c\/p\u003e\n\u003ch2\u003eAn adjustable and replaceable seal\u003c\/h2\u003e\n\u003cp\u003eThe 252 gasket seals around the Presta valve. Turning the end cap increases gasket compression as it wears. When the gasket eventually becomes dry, cracked or starts to leak, it can be replaced without replacing the complete adapter.\u003c\/p\u003e\n\u003cp\u003eSILCA machines the body from 6061 aluminium. The adapter is rated above 300 PSI which also makes it suitable for the high tyre pressures used on the track.\u003c\/p\u003e\n\u003ch2\u003eWho is it for?\u003c\/h2\u003e\n\u003cp\u003eThe Disc Wheel Adapter is made for the narrow valve openings found in solid disc wheels. It is useful for mechanics, track riders, time triallists and triathletes who want to use a normal floor pump or compressor inflator with a disc wheel.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat pump head does it connect to?\u003c\/strong\u003e\u003cbr\u003eThe adapter threads into a Schrader pump head. The valve side presses onto the disc wheel's Presta valve.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it need to be held while inflating?\u003c\/strong\u003e\u003cbr\u003eIt is a press-on chuck. The gasket grips the valve but the adapter is normally held in place while inflating.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the gasket be replaced?\u003c\/strong\u003e\u003cbr\u003eYes. The correct spare is the SILCA 252 Gasket for Disc Adapter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat pressure is it rated for?\u003c\/strong\u003e\u003cbr\u003eSILCA rates the adapter above 300 PSI.\u003c\/p\u003e\n\u003ch2\u003eProduct details\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eUse: inflating a Presta valve in a disc wheel\u003c\/li\u003e\n\u003cli\u003ePump connection: threads into a Schrader pump head\u003c\/li\u003e\n\u003cli\u003eType: press-on pump chuck\u003c\/li\u003e\n\u003cli\u003eMaterial: CNC-machined 6061 aluminium\u003c\/li\u003e\n\u003cli\u003eKnurled gripping surfaces\u003c\/li\u003e\n\u003cli\u003ePressure rating: above 300 PSI\u003c\/li\u003e\n\u003cli\u003eReplaceable SILCA 252 gasket\u003c\/li\u003e\n\u003cli\u003eSKU: AM-PU-CHU-ASY-001\u003c\/li\u003e\n\u003cli\u003eUPC \/ GTIN: 853740005053\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SILCA","offers":[{"title":"Default Title","offer_id":56989460136322,"sku":"AM-PU-CHU-ASY-001","price":35.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0928\/1601\/5746\/files\/silca-disc-wheel-adapter-levykiekko-1.png?v=1792490027"},{"product_id":"silca-tubeless-bundle-litku-1l-ruisku","title":"SILCA Tubeless Bundle - Sealant 2.0 1 L + Sealant Injector","description":"\u003cp\u003eSeat your tubeless tyre first, then add the sealant. This bundle pairs one litre of SILCA Ultimate Tubeless Sealant 2.0 with the matching Ultimate Sealant Injector. Use the injector to add sealant through the valve without lifting the tyre bead off the rim.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBetter value as a bundle than bought separately.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSealant 2.0 combines carbon fibres and latex to form a plug at the puncture. It sealed 6 mm punctures in SILCA's tests. The new formula works on its own without a separate Replenisher additive. The one-litre bottle is a practical size for maintaining several bikes, with sealant left for later top-ups.\u003c\/p\u003e\n\u003ch2\u003eWhat's included\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 × SILCA Ultimate Tubeless Sealant 2.0, 1 litre\u003c\/li\u003e\n\u003cli\u003e1 × SILCA Ultimate Sealant Injector, 2 oz capacity\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eAdd sealant through the valve\u003c\/h2\u003e\n\u003cp\u003eRemove the Presta valve core, measure the amount your tyre needs into the injector and push it slowly into the tyre. Refit the core and inflate. This method works with Presta valves that have a removable core. The fibre-containing sealant cannot be injected through a Reserve Fillmore valve.\u003c\/p\u003e","brand":"SILCA","offers":[{"title":"Default Title","offer_id":56990345888130,"sku":"TVK-SILCA-LITKU-1L-RUISKU","price":54.8,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0928\/1601\/5746\/files\/silca-tubeless-bundle-1l-litku-ruisku.png?v=1792516126"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0928\/1601\/5746\/collections\/silca-super-secret-2-0-ketjuvaha-100-ml-1.png?v=1792490298","url":"https:\/\/toninverkkokauppa.com\/en\/collections\/silca.oembed","provider":"Tonin Verkkokauppa","version":"1.0","type":"link"}